# Red Zombie Installation Guide

### **Tempered Glass Installation Instructions**

**1.** Make sure your hands are clean and that you are in a dust free environment.

**2.** Clean the surface of your device thoroughly with the Alcohol Wipe.

**3.** Use the Microfiber Cloth to complete surface cleaning.

**4.** Peel off the first layer and position Red Zombie Glass on your device.

**5.** Once Positioned, press in the center of the Glass and slowly work your way toward the edges.

### **Tempered Glass Installation Video**

### **Liquid Glass Installation Instructions**

**1.** Use cleaning wipes #1 and #2 to remove all dirt, germs, and grease.

**2.** Use the microfiber cloth to thoroughly dry your device.

**3.** Apply 1/2 of vial contents for a watch.

Apply the entire contents of vial for a smartphone front or back.

Apply 2 vials for an iPad or tablet.

**4.** Use **dry cloth #2** to spread Liquid Evenly over the entire glass surface.

**5.** Wait 5-10 minutes.

**6.** Use the microfiber cloth to buff the glass surface dry.

**7.** The nanotechnology will completely cure within 24-48 hours.

**8.**We recommend waiting 15-30 minutes before using your device.

### **Liquid Glass Installation Video**

### **UV Glass Installation Instructions**

**1.** Please clean the surface of device thoroughly in a dust-free environment.

**2.** Apply liquid adhesive onto center of device.

**3.** Peel back off of Zombie UV Glass.

**4.** Once positioned, lightly press in the center of glass. Adhesive will then slowly work its way to the edges by itself.

**5.** Wipe away any excess liquid dripping from the edges with a cloth or paper towel.

**6.** Use UV light to cure the adhesive onto the device.

**7.** If your device has an on-screen fingerprint scanner, be sure to watch the instruction video first. You may need to re-scan your fingerprints after installation is complete.

### **UV Glass Installation Video**